Old Barn - Glenorchy - Oil Painting - Samuel Earp copy.jpeg

In this painting tutorial I will show you how to paint this countryside scene featuring an old barn. This painting is inspired by the south island of New Zealand.

Suitable for oils and acrylics.

Reference Photos

Here is a reference photo I took and used in this painting. Please feel free to use or copy this photo if you would like to have a go at painting this art work.

IMG_5844.JPG

Colours

I painted this artwork using oil paint and the colours I used in this painting are as follows:

  1. Titanium white
  2. Burnt sienna
  3. Yellow oxide (you can also use yellow ochre instead)
  4. Cadmium yellow
  5. Cadmium orange
  6. Quinacridone crimson (you can also use alizarin crimson instead)
  7. Ultramarine blue
  8. Phthalo green

Brushes

Here is a list of the brushes I used in this painting:

  • No.5 flat
  • No.3 flat
  • No.2 flat 
  • No.3 filbert
  • No.1 round 
  • No.0 round

Composition

The painting incorporates a group mass composition where the barn, poplar tree and gum tree is the main area of interest in the painting.

Old Barn - Glenorchy - Oil Painting - Samuel Earp copy 2.jpeg

Stage One – Blocking in the Painting

I am painting on a 12” x 16” linen panel. The panel is pre made with a medium weave linen that is oil primed.

I sketch the composition using a No.1 round brush with burnt sienna mixed with Liquin Original (Liquin). I am using Liquin as a medium to thin the paint, it also has the advantage of speeding up the drying time.

IMG_2036.jpeg

I begin by painting the dark values and shadows first as this will help me to quickly establish a tonal dynamic in the painting. Values are how light or dark a subject is and we will find our darkest values in the foreground of a landscape but as landforms recede into the distance darks are not as dark as the value range narrows.

I paint the clouds with a mix of ultramarine blue, burnt sienna, titanium white and a little quinacridone crimson to give the mix a violet tint.

I use the same colours in the mountains but with much less titanium white to make the value of the colour mix darker. I haven’t mixed the colour thoroughly to allow some of the individual hues to be visible. I have also used the same colour combination for the shadows in the barn but in varying amounts. The barn roof has a lot more burnt sienna in the mix and less ultramarine blue to give the roof a rusty appearance.

The metal walls of the barn have a lot more blue in the mix and are a similar colour to the background mountains. By using the same colours for the clouds, mountains and barn means that I have tied these zones together and so there is more colour harmony in the painting.

The Lombardy poplar trees have the darkest shadows in the painting. Trees are some of the darkest values to be found in the landscape and I have used a simple mix of ultramarine blue and yellow oxide.

I am mainly using No.5 flat brushes.

IMG_2039.jpeg

I paint the cloud highlights with a mix of titanium white and burnt sienna. The sky is a mix of Ultramarine blue, titanium white and a little phthalo green.

Overall I am trying to keep my colour mixes simple so I can create cleaner colour and I apply this approach to the mid ground. The mid ground is in shadow and I have used a mix of ultramarine blue, yellow oxide and titanium white in varying amounts to create different textures. I have also rounded off the greens with a little quinacridone crimson.

IMG_2040.jpeg

Moving forward in the painting I begin working on the Lombardy poplar trees in the foreground. I am using a more saturated green and I mix yellow oxide, ultramarine blue to start with and then I increase the saturation by adding some cadmium yellow. I can make the value lighter if I need to by mixing in some titanium white and I also mix in a little cadmium orange to round off the green and make the colour look more organic.

I am keeping the values of the greens in the tree foliage darker at this stage so I have plenty of room to add lighter layers later on in the painting.

IMG_2041.jpeg

Next I start blocking in the grass in the foreground which is a mix of pale green grass and straw coloured grass. The green grass is the same colour mix as the foliage in the Lombardy poplars but with more titanium white in the mix and also a little phthalo green.

The straw coloured grass is a mix of yellow oxide, titanium white and quinacridone crimson. If I need to desaturate the colour I can mix in a little ultramarine blue.

The barn and trees are casting shadows in the grass and it’s very important that we paint these so as to add to the realism of the scene. The grass shadows are a mix of ultramarine blue, yellow oxide, titanium white and quinacridone crimson.

IMG_2043.jpeg

I complete the blocking-in stage by painting the sunlit side of the barn which is a mix of burnt sienna, ultramarine blue, a lot of titanium white and a little yellow oxide. Keep in mind the value of this colour is light.

Finally I mark in the basic shapes of the sheep with a mix of ultramarine blue, burnt sienna, quinacridone crimson and titanium white, the same colours I used in the clouds and mountains. For the highlights I used a mix of titanium white with a little burnt sienna.

At this point in the painting I allow it to dry so I can begin adding details to it. During the blocking-in stage I am not at all worried about details as I want the loose brushwork to come through in the painting.

It’s here I want to make sure all of my colours and values are working, then I can move onto the next stage.

IMG_2045.jpeg

Stage Two – Modelling and Adding Details

In this stage of the painting I am adding more details and refining the various zones. I am essentially using the same colours that I used during the blocking-in stage but building up my lighter values to create a three dimensional effect and atmospheric depth in the painting.

I added a few details to the clouds and mountains in the background but not very much. In general I go sparingly with the details so as not to overcomplicate the painting or confuse the eye.

I begin adding details to the barn where I am essentially using the same colours as I did during the blocking-in stage but I am mixing lighter value colours.

I begin modelling the Lombardy poplar trees adjusting the shadows and adding lighter layers of paint to the areas of the tree canopies that are in full sunlight. My green mix is still the same using yellow oxide, ultramarine blue, cadmium yellow but with more titanium white. I also mix in a little cadmium orange and in places phthalo green which increases the saturation.

I add lighter layers to the grass in the foreground and again essentially using the same colours as before. During the modelling stage I am preparing the painting so I can add final details and highlights that will make the painting come alive.

IMG_2274.jpeg

Stage Three – Final Details

I have let my painting dry again and it is here where I add the final details to my art work. This is where I will be using my lightest values as well.

I paint the highlights on the crowns of the Lombardy poplar trees using a mix of titanium white, cadmium yellow and a little phthalo green. I go sparingly with the paint just adding a few highlights here and there.

The stems and branches are a mix of ultramarine blue, burnt sienna and titanium white and I have used these colours for the tree trunks as well. The highlights are a mix of ultramarine blue, burnt sienna, titanium white and a little yellow oxide.

I add highlights to the barn using titanium white mixed with a little yellow oxide and burnt sienna.

Finally I add some details to the sheep, mostly adding highlights which was a mix of titanium white, burnt sienna and a little yellow oxide.

Old Barn - Glenorchy - Oil Painting - Samuel Earp copy.jpeg

Thanks for reading 😊